Home
  Search Archives     
  Available Archives
   1969-1979
   1980-1989
   1990-1999
   2000-2009
   2010-2017
    1969    
    1969    
1970
1970
1970
1971
1971
1971
1972
1972
1972
1973
1973
1973
1974
1974
1974
1975
1975
1975
1976
1976
1976
1977
1977
1977
1978
1978
1978
1979
1979
1979
    1980    
    1980    
1981
1981
1981
1982
1982
1982
1983
1983
1983
1984
1984
1984
1985
1985
1985
1986
1986
1986
1987
1987
1987
1988
1988
1988
1989
1989
1989
    1990    
    1990    
1991
1991
1991
1992
1992
1992
1993
1993
1993
1994
1994
1994
1995
1995
1995
1996
1996
1996
1997
1997
1997
1998
1998
1998
1999
1999
1999
    2000    
    2000    
2001
2001
2001
2002
2002
2002
2003
2003
2003
2004
2004
2004
2005
2005
2005
2006
2006
2006
2007
2007
2007
2008
2008
2008
2009
2009
2009
    2010    
    2010    
2011
2011
2011
2012
2012
2012
2013
2013
2013
2014
2014
2014
2015
2015
2015
2016
2016
2016
2017
2017
2017

 
   2003 >> June >> H and H Electric Co  

H&H Electric Co.
Reprinted from "Crown Jewels of the Wire", June 2003, page 14

Larry Veneziano has created some new commemoratives this year. Shaped like eared Jumbo's (CD 269), only smaller, these modern collectibles were poured in ruby red, cobalt blue, and yellow vaseline colored glass.                                                                
                                                                                                 

The one placed in service on the power pole above is a ruby red. Actually, the H & H Electric Company in Chicago placed a couple on poles. That was done to prove that the items are completely workable, low voltage insulators and not just paperweights. Still, the collectibles weren't manufactured to be insulators, but to commemorate them. H & H intends for its "baby jumbo insulators to become an icon in the hobby that will be produced in limited numbers in many colors for years to come."

The insulators are embossed on the front: (dome) TRIBUTE TO HISTORIC EVOLUTION OF 'ELECTRICITY' (skirt) H&H ELECTRIC CO / LOCAL #9 IBEW / CHICAGO, ILL. On the back the embossing reads, (skirt) BABY JUMBO GLASS INSULATOR / COMMEMORATIVE EDITION. Wait, there's still more embossing. On the base, the insulator reads, L.S. VENEZIANO / COLLECTOR 2002 EDITION. They are dated 2002 because that's when production on the mold started. But creating a professional mold is time consuming, and the insulators weren't actually poured until this spring. Take a close look at the high quality of the mold. Note that it is made with the two halves hinged, in the fashion of historic, original and professional molds created for actual production runs of glass insulators. 

H&H has pledged to keep the production of these collectibles limited, and to document the numbers produced. This year, 185 of the baby jumbos were produced in yellow vaseline glass. Those vaseline colored ones are threadless, and were made for locals and contractors of the International Brotherhood of Electrical Workers. Only 60 of the vaseline glass commemoratives became available to insulator collectors. 

280 of the collectibles were made in Ruby Red glass, and are threaded. About half of those were intended for the I.B.E.W. locals and contractors; with 150 of that number made available for insulator collectors. 140 more baby jumbos were made in cobalt blue glass, of which 100 were earmarked for the collecting community.

In its sales promotions, H&H notes, "From their inception in 1844, insulators have linked the world. They have lined our railways and our waterways. Telegraph, telephone, railroad and electrical power service hinged on the success of the single glass insulator. The insulator itself was manufactured from many substances including glass, porcelain, metal, and even wood.

"They have been found in various unique shapes and sizes, threaded and unthreaded. The earliest kind of insulators included, but were hot limited to, glass knob types, glass blocks that were grooved into crossarms, then pin types with a smooth threadless pin hole that typically standardized the insulator industry, until the threaded or screw on concept came along to hold and secure the insulator to its base.

"This single upgrade changed the configuration then, and is in use now, as a modern-day insulator. In primitive times, insulators were usually custom ordered through glasshouses, purchased by power companies, early telegraph or telephone companies, or private individuals who engraved their names or logos into the glass to advertise their new and improved items. Often they strived to improve their insulator by trial and error, each attempting to make another manufacturers shape and style obsolete. As a result, over many years, different types, shapes, colors and embossing emerged! 

"Over time, interest was created and a hobby was born. People that collect these insulators consider this hobby a journey through the past. What a tribute to our electrical history." 

Original Jumbo's were made in two styles. CD 269 had a saddle groove at the top to hold heavy electrical cable. The CD 140 had a large wire groove for holding electrical cable on the side of the insulator. Both styles were typically used in electrically powered subways in east coast cities.

An advertisement showing the commemoratives in color appeared in the May issue of Crown Jewels on page 34. Also see this month's ad on page 13. A percentage of sales goes to union Local No.9 of the I.B.E.W.



| Magazine Home | Search the Archives |