Porcelain Insulator News
by Elton Gish
Reprinted from "Crown Jewels of the Wire", March 1995, page 15
We have been getting a lot of reports about some interesting porcelain
insulators. This month we will present a good mixture of unusual shapes in
multiparts, rare threadless, and an incredible value at a flea market.
Paul Axman (NIA #4961) always seems to come up with something interesting in
Canadian multi-parts, There aren’t many collectors in his area that share his
interest, so Paul just about has his pick of what there is available. The first
one is new multipart style M-2320A, measuring 7.5 - 6 x 6. (Photo below) It
has a very distinctive profile and large crown. The glaze is a beautiful
slightly mottled speckled rust with a large incuse mark on the crown that looks
like a cent mark or I inside a C. (Below.) This same marking has been
reported on some U-610 specimens found in Canada. M-2320A was cataloged by the
Canadian Porcelain Co. in the 1920’s, but I do not know what the marking
means.
Paul’s next insulator, M-2512, is also a new style cataloged by the
Canadian Porcelain Co. in the 1920’s. It has a similar profile, crown, and
flared bottom skirt like M-2320A, but the glaze color looks more mahogany. Paul
reported finding several M-2615’s with a variety of markings. One specimen has
an underglaze ink “C.P.” marking under the top skirt and an underglaze ink
“8/27” marking on the outside of the bottom skirt (see photo). It seem
obvious that this insulator was made in August 1927. Others of this style do not
have these markings but do have either an incuse “A.F.” or incuse “H.H.”
under the top skirt. Paul says the periods in the initials are square shaped.
Unmarked M-2512 made by
Canadian Porcelain Co.
8.5 - 7 - 4 x 7
Canadian Porcelain Co. M-2615
9 - 7.5 - 3 x 6
Paul also found a rare U.S. jewel. It is M-2340 with a nice gray glaze and
incuse marking THOMAS under the top skirt. One of these showed up at the
Allentown National and was quickly snapped up by Jimmy Burns (NIA #4032). These
were made circa 1905-1910.
Doug MacGillvary (NIA #259) reported finding two specimens of a new
threadless style, U-971. Both specimens are finely made pottery insulators with
a shiny gray glaze. They have three short petticoats in the same fashion as
Elliott threadless styles U-979 and U-980 which leaves little doubt that these
were manufactured by Bennington Potteries circa 1850’s.
U-980 Elliott between two U-971’s.
Ken Willick (NIA #3709) reported what is easily the flea market find of the
year. He found an unmarked U-376 with a white glaze. It is a little smaller at
4-7/8 x 4 compared to 5-1/8 x 4-3/8 for the previous one-of-a-kind specimen that
has a unique pale blue glaze with darker blue specks. Unfortunately, Ken had to
spend all of his coffee money to purchase this super rare jewel — a nice shiny
quarter!! Wow, that is being at the right place at the right time! Ken was lucky
that he did not have a hole in his pocket or he would have lost that quarter
before he could make the purchase (He probably ripped a hole in his pocket
reaching for the quarter). U-376 is one of the Etheridge patent (patented June
25, 1901) insulators made to fit on a hollow pin. The insulator was held in
place by a flat spring clip inside the pin with bend ends that extended out the
top and bottom. The top end of the clip fit inside the groove in the pinhole to
secure the insulator on the pin and the bottom clip kept the pin from coming out
of the crossarm. This allowed the insulator to rotate freely on the pin. A
rolled section near the middle of the pin prevented the pin from falling through
the hole in the crossarm. No pins have ever been found. The blue specimen of
U-376 has the incuse marking “LIMA, N.Y.” on the crown, so Ken’s white
specimen was probably a cousin to it, since he found it near his hometown of
Lima, NY. Yes, Ken lives in the heart of Lima and Fred Locke country.
Three rare white porcelain insulators:
U-184 embossed Harloe Patent,
U-376, and unmarked Thomas 3-part “glaze-filled” U-944
|