Foreign Insulators
by Marilyn Albers
Reprinted from "Crown Jewels of the Wire", November 1990, page 9
CAROL AND MARILYN CONDUCT INSULATOR
RESEARCH TRIP ON FOREIGN SOIL
PART II
On Monday morning, April 16th, Carol and I said goodbye to Ans Galesloot and
her family in Utrecht, Holland, and began the 180 mile drive to Krefeld, West
Germany. There we were to meet Marco Schmitz-LeHanne, a handsome young
insulator collector, who also happens to be 28 years old, single and a very good
electrical engineer! He and Mike Guthrie had been corresponding and trading
insulators for several months and Mike was kind enough to give us Marco's
address.
It was late afternoon by the time we found his house and rang the bell.
He'd been waiting and met us at the door with the biggest smile you'd ever hope
to see. Carol and I wore pretty big ones ourselves! After a warm welcome from
his parents, Marco took us upstairs to his study where he kept his books and
other reference material as well as a few of his favorite insulators. "The
rest of the collection," he said, "is in the basement of my
grandmother's house. We will go there in a little while."
Marco Schmitz-LeHanne with some of his favorite
pieces on shelves in his
bedroom.
Colored glazes on U-1692 porcelain insulators which were used to designate
certain
lines. (L to R) White with a red crown, yellow, cobalt, dark green and
red. Watch the
January issues for these insulators pictured in living color!
Marco's mother brought up coffee and sweets to enjoy while we visited and
watched Marco unwrap the insulators and books we had brought as gifts. He was
happy with them all, but especially pleased with the complimentary subscription
to Crown Jewels of the Wire!
After we confirmed our hotel reservations in
Krefeld, Marco treated us to dinner at the Gleumes Restaurant, named for the
Gleumes beer that has been brewed right there since 1807. Re wanted us to taste
German food typical of the Lower Rhine Valley and suggested pork cutlets, mashed
potatoes and sauerkraut. The meal was delicious. So was the beer!
It was dark by
the time we started back to see "the rest of the collection in
Grandmother's basement." She lives next door to Marco's family in a very
large old house which proved to have a perfectly wonderful basement. Armed with
a flashlight we crept down some outside steps to a creaky old door. Upon opening
it we found ourselves in a long room with a low ceiling, dark comers, a few
cobwebs, etc., etc. What atmosphere! It even smelled like mysterious old
basements are supposed to! There, spread out before us were several long tables
holding box after box of glass and porcelain insulators of many colors, shapes and sizes. Marcos storage privileges do
not include display space, but you know what a great time Carol and I had
turning over everything in those boxes. He gave us several of his duplicate
insulators and signs, which we were happy to have in trade. After a delightful
evening, we said goodnight to Marco and drove back to our hotel.
Marco's grandmother's basement with boxes and boxes of his collection.
Three styles of French P.F.C. insulators purchased by
Marco's parents in a Brussels antique store
Tuesday
morning, April 17th, found all three of us back in Grandmother's basement taking
pictures of Marco's collection as well as making shadow profiles and getting
measurements of the insulator styles that were new to us. Marco had made an
appointment for us at 2:30 that afternoon to visit a museum that is connected
with the major electric company in the area - RHEINISCH - WEST FALISCHES
ELECTRIZITATSWERK (RWE). The name of the museum is ELECTROTHEK which,
according to Marco, is an artificial name with "THEK" being equivalent
to our "THEQUE" as in discotheque. He says that people who are
interested in electrical distribution can come here to see as well as touch the
various pieces of equipment which have played such an important part in the
history of power supply.
Sign on museum door
The man who is responsible for the formation of the
museum is Mr. Wolfgang Von Moock, Head Engineer at RWE and Marco's good friend.
It was he who met us that afternoon and took us through the museum. Though
ELECTROTHEK has been financially backed by the company, it is really Mr. Von
Moock's collection of old meters, switches, motors, cables, insulators,
linemen's gear and tools, poles, etc. and he has had a lot of fun with it. He
was very interested to learn of our hobby of insulator collecting, especially
when we told him we had come all the way to Europe to do research! He asked us
to send him copies of the new insulator books when they are published and
thanked us for coming.
The rest of the day was spent with Marco going over many
of his old insulator catalogs and other records, identifying manufacturer's
markings, etc. His knowledge of electrical systems was amazing! Consequently,
he's been asked by the municipal power supplier to help plan cable networks.
He's also enjoyed helping with the museum at RWE and has become a very familiar
face there as well.
(Left) Wolfgang Von Moock, Carol and Marco discussing some of the museum
insulators on display (right) |
|
We thanked Marco for a wonderful visit and said goodbye,
promising to keep in touch with him. It was a good feeling to know we had a new friend.
On
Wednesday morning, April 18th, we left Krefeld and headed south to Aachen where
we hoped to find the Vereinigte Glaswerke (United Glassworks) or VEGLA glass
factory. Using the address we had been given, we found not the factory but a
very large office building with VEGLA-HAUS over the main entrance. There we were
able to talk with the American representative, Mr. Jack Munch. We explained our
mission of research, our popular American hobby and a few photos of glass
insulators with the VEGLA marking. When we asked for samples, he said he had no
memory of insulators ever having been made by Vegla and that its only products
today are automotive safety glass, window glass for offices and decorative glass
building blocks. He told us the actual factory is located in the town of
Heraogenrath, a few miles away, but when we went there, we were not allowed to
proceed beyond the gate. But someone there did give us the name and phone number
of the Public Relations person back at VEGLA HAUS - a Dr. Claussen, who could
provide us with some historical information about the company. Somewhere there
had to be records of Vegla's insulator production.
Marco had told us he'd found
Vegla insulators at the electric company in the town of Kohiseheid, so we
decided to try that the next day.
Early Thursday morning we called Dr. Claussen.
She was very interested in helping us and promised to send the information we
needed if we would put our request in the form of a letter to her when we
returned to the States. She said it would take her some time to gather it all
together.
We drove to Kohlscheid and stopped to ask directions to the electric
company. We were told it is called ASEAG and that we should ask for the
manager, Herr Zimmer. Well, Herr Zimmer had no time for us so he asked a couple
of his employees to show us where the insulators were stored. Their names were
Roman and Martin and they couldn't have been more helpful. They led us down some
steps into another dark and mysterious basement and did we find insulators!
There were actually barrels of glass pintypes with the Vegla marking as well as
several French insulators embossed EIV. None were cemented to pins! They found us a box and helped us choose several of each
style. They were so friendly and so interested that we couldn't thank them
enough.
The VEGLA - HAUS building in Aachen, Germany
Roman and Martin, our new friends
and employees of ASEAG at Kohlscheid
When we returned to the States in May, I wrote a formal letter to Dr.
Claussen at VEGLA HAUS requesting information about the company's insulator
production. So far I have not received an answer, but I am sure it will come. When it does, I will share it with you. At least we have learned a bit more
about the VEGLA Glassworks.
In Part III I will tell of our travels to Belgium
and France. Stay tuned!
GET WELL WISHES TO MARILYN! On October 22nd, Marilyn
underwent surgery on her left arm to repair the damage due to improper healing
of the fracture she received during our research trip in Europe. We all wish you
a speedy recovery. ....Your European Trip Roomie!
|