Me And The 143 (#7)
by Grant Salzman, NIA #1785
Reprinted from "INSULATORS - Crown Jewels of the Wire", December 1980, page 21
In this article I promised
to bring you up to date on various additions to my early articles, and I also
want to tell you about a recent trip I made to British Columbia, and about some
exciting discoveries of 143's! First, let me bring you up to date regarding
additions to earlier types.
(Drawing is by Clay Salzman)
In article #2 which discussed the Canadian Pacific
Ry Co two-piece molds, you may add the following:
The embossed variety of mold
style #1-A has a bluish-aqua shade.
The unembossed mold style #1-B has a variety
that is considerably shorter than usual. It is aqua and about 3/8 inches shorter
than the usual style #1-B. I don't believe that this mold was subject to long or
short pours, so it may have been an experimental type.
In the portions
discussing mold style #1-C, a blue variety should be added to the "R.Y."
listing. Also in the no-name listings, to the no-name with smooth exterior, add
the colors light aqua, pale aqua and light SCA. To the "whittle mold"
no-name, add a light SCA shade.
|
In article #3 which discussed the three-piece
molds of Canadian Pacific Ry Co, you can add a light gray and a yellow-amber to
the colors listed for the 143 embossed Canadian. Pacific. Ry. Co (note periods)
My thanks to Mel Shootman of Colorado for sending me a color photo and data
about the yellow-amber variety. It is really a beauty!
In that same article you
can add another embossing to mold style #1D
8. |
F -- Canadian Pacific Ry. Co. over
a blot-out of a large C? R
Aqua (Rounded Base) |
This one is really unusual
because it is the only example I have found of Canadian Pacific being embossed
over a blot-out. You can' tell for sure whether the blot-out is a large C P R
or a large C N R, but it measures out exactly right so that I know that it was some
sort of cover-up, and not just a mold irregularity. My thanks to Dear Axelson
for providing me with this one.
The last few months have been real exciting as
other new discoveries have popped up. Although I won't write about these in
detail until later articles, they are so exceptional that I wanted to tell you
about them now.
Rollo McDonald of Ontario recently contacted me about an
exceptional 143 that I had never heard of! It was a Great North Western
Telegraph Co which had a grooved base!! Grooved base varieties have been found
in the Montreal Telegraph varieties, and they are quite common in the Dwight
Pattern 143's, but I have never heard of one on Great North Western. I am
inclined to suspect that the common thread between these is the employment of
Mr. H. P. Dwight. If true, it would indicate that Mr. Dwight began working at
G.N.W. before their merger with Montreal Tel.
If the development of the
grooved base is tied to Mr. Dwight (and the widely used "Dwight
Pattern" would seem to bear this out), then it would seem that somewhere we
should find a "G.N.W." with a grooved base. Although I have seen
several base styles on the G.N.W., I haven't seen the grooved variety. Can any
of you help me out in this?
Anyway, my sincere thanks to Rollo McDonald for
bringing this one to light and for letting it join my collection. (Mr. McDonald
is a highly-regarded 143 expert. In the early 70's he teamed up with R. J.
Gauchi to publish a study of CNR 143's, which study is a classic reference work
even today.)
This past September I made another trip to British Columbia and had
the chance to visit several collectors that I had first met last Spring. On this
trip I took my seventeen-year-old son Tom with me, as well as a friend and
fellow insulator collector, Frank Feher of West Sacramento. We had an
exceptionally nice visit with Bert and Dot Kirkland in 100 Mile House, and with
Aidan Morgan in Cache Creek. Then we made a quick trip to Kamloops and got to
see Greg Evans, Bill Gurney and Milt Johner.
When we stopped by to see Greg
Evans, he proudly showed us two new items in his 143 collection, and real gems
they were! Greg had picked them up since my last visit. When I say "picked
them up", I mean that literally! He picked them up off the ground! He was
walking an old RR line in one of the eastern provinces when he found them. Both
were no-name types, but the real thrill came when he got them home and cleaned
them: One was a beautiful green, and the other was a rich yellow!! Not only
that, but they were both the double-threaded variety!!! (The double-threaded
143 is a unique and which we will discuss thoroughly in a later article. Suffice
it to say it is quite scarce and very desirable, in any condition or color.)
In
plain aqua the double-threaded is really tough. In green it is extraordinary,
and in the yellow it is a true prize! Greg and his wife Earlene are expecting
their first child any time now, and maybe when the baby comes, Greg will lose
interest in 143's and will let me have some of his. Maybe about 18 years from
now, when his auto insurance goes sky high and someone is going to go to
college, maybe Greg will be faced with the poor house, like most of us, and will
be willing to sell out!
During our visit with Aidan Morgan, he told me about a
friend of his who had taken insulators off a short line that had been abandoned
in British Columbia. He had kept the insulators, and there were evidently
several light green horizontal-ridged Withycombe 143's in the bunch! I had heard
of places back East where groups of SCA Withys had been found, but I had never
heard of a concentration of green ones. The green Withy seems to have been used
mostly out West, but I have only heard of widely scattered finds. Anyway, I was
interested in finding out who had built the line, where it was located, how many
Withys had been found, how old the line was, etc., etc. Aidan called his friend
and was told that there were two types of Withycombes in the bunch that had been
taken down.
Aidan took me over to his friend's house, where I was shown
an almost perfect light green horizontal-ridged Withycombe; however, I totally
ignored that jewel, because right next to it was a 143 that I had never seen
before. It was absolutely a brand new discovery! It was a Withycombe with
horizontal ridges, but the shape of it was more like the shape of the Withy with
vertical ridges. It was a two-piece mold and was aqua!! Additionally, the ridges
below the wire groove were circular, and not spiral. It is in superb condition,
and Aidan's friend has agreed to trade it to me. Hopefully, I will be able to
get it in time for the National! Aidan's friend has also given me lots of detail
and background information about these items, and has also drawn me a map
showing the location of the line! Later on when I write the article about
Withycombes I will include this new discovery and will have the map printed in
the article.
|